Question: Which Oil Is Thicker 5w30 Or 10w40?

Is it OK to use 15w40 instead of 5w30?

5w30 flows better than 15w40.

5w30 provides best cold start properties.

Using 15w40 instead of 5w30 will increase your fuel consumption because of more load on your engine’s crank.

No it won’t blow off,you will just wear your engine out quicker because the oil won’t flow to the moving parts as quickly !.

Will 5w40 hurt a 5w30 engine?

In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to temperatures of 50°C, as opposed to 30°C.

Is it OK to put different oil in your car?

While it is not recommended to mix various brands of motor oil (such as Valvoline, Castrol, Total or Mobil 1), it will not cause any damage to your engine. What is far more important is to stick with the same oil viscosity as recommended by the car manufacturer.

Is it OK to use 0w20 instead of 5w30?

0w-20 is simply a different viscosity of oil. It won’t be an advantage to your engine if your manufacturer suggests you use 5w-30 and may indeed be a detriment to your engine. 0w-20 may be a recommended oil for certain conditions for your engine and may not be recommended for your engine.

When should I use 20w50 oil?

20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

Is 10w40 good for high mileage?

High mileage protection Mobil Super High Mileage 10W-40 uses a combination of synthetic and conventional high quality base oils combined with modern performance additives to help provide long engine life and outstanding protection for vehicles with more than 75,000 miles.

Can I use 5w30 instead of 10w40?

The difference is in the viscosity of each at different temperatures. … The 5w30 oil will flow better at low temperatures than the 10w40 oil. This means that the 5w30 oil will protect the engine better at low temperatures, usually when the engine is just starting or during weather conditions such as winter.

What oil is thicker than 10w40?

The only difference between 10w30 and 10w40 oil is their thickness at engine operating (hot) temperatures. They will flow at the same rate during a cold startup since the starting viscosity is “10” for both formulations.

Which oil is thicker 5w30 or 5w40?

Viscosity The working viscosity of 5w30 is basically from 9.3 to 12.5mm2/s whereas the operating viscosity of 5w40 is 12.5 to 16.3mm2/s. That means 5w40 has larger viscosity than 5w30.

Will thicker oil damage my engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

What happens if you put wrong oil in your car?

You might notice a few oil spot in your garage or under your car because using the wrong oil can lead to leaks, or you might become aware of a burning smell while driving. If the oil isn’t working as it should engine parts might not be lubricated well enough and cause friction, which can burn the oil.

Is 20w50 good for high mileage?

Considerations. The viscosity level of engine oil 20W50 is geared toward racing engines, as opposed to high-mileage engines, that run extremely hot and need heavy load operation. … Since its viscosity is so great, it can drag down the functioning of the crankshaft, resulting in less horsepower.

Will thicker oil stop lifter noise?

If the oil is too thick then it will not pass through the tiny holes resulting in an increase in friction. The increased will not only lead to noisy lifters, but it may also increase the temperature a little bit. On the contrary, if the oil is too thin, it won’t provide proper lubrication as well as padding.

Can I put 20w50 oil in my car?

Depending on the recommendations for the particular vehicle, 20W50 oil is suitable for large or small diesel engines, gasoline engines, motorcycles and aviation vehicles. It is also suitable for both air- and liquid-cooled engines. … I’d recommend AVOIDING putting such a different viscosity in your engine.

Is 5w30 good for high mileage?

Both high mileage 5w30 and 10w30 engine oils have the same additives, the only difference is the viscosity at cold startups. Since both oils have the same operating temperature viscosity (30) and additives, they will perform exactly the same. However, 5w30 flows much better than 10w30 during cold starts.

Should you use thicker oil in an older engine?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well.

Can I switch from 5w40 to 5w30?

In most cases, if they recommend SAE 5W-40, then SAE 5W-30 may cause problems with wear or even engine damage. SAE 5W-40 will always be “Thin” enough at any temperature, but SAE 5W-30 may be too “Thin” at high temperatures.

What happens if engine oil is too high?

With too much oil in your engine, its fluid level in the oil pan will be so high that it can be splashed by some of the moving parts in the engine block, specifically the crankshaft lobes and connecting rod “big ends.” That, in turn, can whip the oil into a frothy consistency, like a well-emulsified salad dressing, …